DS-2CD2732F-IS 3MP IP camera, vaarifocal lens

SALE

Zoom

Our Price: CALL(£0.00 Inc. VAT)

Weight: 1.10kg

Availability:

Model: DS-2CD2732F-IS

Description
Related Products
Manual & Spec
Hikvision Support Page

Hikvision remote viewing setup	Hikvision Frequently asked question
Hikvision recommended HD size	Hikvision Technical Bulletins
Hikvision how to	Hikvision speed dome firmware
Hikvision youtube channel	Hikvision IP camera firmware
Hikvision DVR firmware	SADP Tools download
Hikvision NVR firmware	Hikvision password reset

Hikvision Support UK
Affordable quality and competitively priced makes Hikvision IP the only choice for all new installs. Plug and play and is sold rebranded or rebadged versions such as HiKcom, Alien Mega Hero, DSD, Odyssey, LTS , KT&C to name a few. The systems are also available in TVI ( HD over coaxial or cat5e using video bulans) or as IP which is also HD over CAT5e with the added advantage of being able to carry power as well as data on one cable. Nearly all units sold by us have the power supply built into the recorder called PoE.

Cost Saving
With just one CAT5e cable to run between NVR and cameras makes Hikvision IP systems fast and neat to install. No need for separate power supply or bulky coaxial cables.

For upgrades to High Definition ( HD), existing cables are likely to be coaxial cable ( like TV aerial cable ). In this situation where re-cabling to CAT5e would be costly, you can use a hybrid recorder. This will allow you to use HD TVI cameras on the coaxial cable and new ones can be wired in CAT5e.

The Hikvision IP cameras have an IP sniffer & configuration software called Hikvision SADP tools. This software is also needed to request password reset as well as the main tool for diagnosing problems. Make sure you install this on your laptop!

A familiar user interface to access the cameras GUI using Microsoft Internet Explorer if needed.

The Hikvision DS-2CD2732F-IS is a 3MP dome IP camera with a range of features including digital noise reduction, wide dynamic range, day and night function, audio input (please note that this camera does not have a built-in microphone), power oveEthernetet for quick and easy installation, an IP66 rated housing to protect the camera from harsh outdoor environments and a built-in microSD card slot for onboard storage.

This camera has 3-axis lens adjustment, allowing you full control over how the camera is mounted and the view adjustment; the third axis of adjustment will allow you to bring the view back to level regardless of the pan & tilt adjustments.

Main features

3 megapixel (2048 x 1536) high resolution
Full HD1080p real-time video
2.8-12mm varifocal lens
IR LEDs: up to 20m
DWDR & 3D DNR & BLC
Support onboard storage (up to 64GB)
IP66
Vandal-proof
audio input
alarm inputs

DS-2CD2732F-I(S)

Camera

Image Sensor:	1/3" Progressive Scan CMOS
Signal System:	PAL/NTSC
Min. Illumination:	0.07Lux @(F1.2,AGC ON) ,0 Lux with IR 0.1Lux @(F1.4,AGC ON), 0 Lux with IR
Shutter time:	1/25(1/30) s to 1/100,000 s
Lens:	2.8 - 12 mm @ F1.4,Angle of view: 105.2°-31.9°
Lens Mount:	φ14
Adjustment Range:	Pan:0° - 355°, Tilt: 0° - 75°, Rotation: 0° - 355°
Day& Night:	IR cut filter with auto switch
Wide Dynamic Range:	Digital WDR
Digital noise reduction:	3D DNR

Compression Standard

Video Compression:	H.264/M-JPEG
Bit Rate:	32 Kbps ~ 16 Mbps
Audio Compression:	-S: G.711/G.726
Dual Stream:	Yes

Image

Max. Image Resolution:	2048×1536
Frame Rate:	50Hz: 20fps (2048 × 1536), 25fps (1920 × 1080), 25fps (1280 × 720) 60Hz: 20fps (2048 × 1536), 30fps (1920 × 1080), 30fps (1280 × 720)
Image Settings:	Saturation, brightness, contrast adjustable through client software or web browser
BLC:	Yes, zone configurable

Network

Network Storage:	NAS
Alarm Trigger:	Motion detection, Dynamic Analysis, Tampering alarm, Network disconnect, IP address conflict, Storage exception
Protocols:	TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP, PPPoE,NTP,UPnP,SMTP,SNMP,IGMP,802.1X,QoS,IPv6,Bonjour(SIP optional)
Security:	User authentication, watermark
System Compatibility:	ONVIF, PSIA, CGI

Interface

Communication Interface:	1 RJ45 10M / 100M ethernet interface
On-board storage:	Built-in Micro SD/SDHC/SDXC card slot, up to 64 GB
Reset Button:	Yes

General

Operating Conditions:	-30 °C ~ 60 °C (-22 °F ~ 140 °F) Humidity 95% or less (non-condensing)
Power Supply:	12 VDC ± 10%, PoE (802.3af)
Power Consumption:	Max. 5.5 W
Impact Protection:	IEC60068-2-75Eh, 50J; EN50102, up to IK10
Weather Proof:	IP66
IR Range:	Up to 20m
Dimensions:	Φ 140 × 99.9 mm (Φ 5.51” × 3.94”)
Weight:	1000g