DS-2CE56H0T-IT3ZE 5MP motorized varifocal lens PoC turret camera
Special Offer: A discount of 10% is available when you order £500.00 or more of any product.
Power over Coaxial (PoC) basically means that power for the camera is supplied by the DVR via coaxial video cable (RG59 or similar), this removes the requirement for separate cables and power supplies which would otherwise be needed to power your cameras. For installers, this means a much more time and cost efficient
PoC can be used on cable runs up to 200 metres and is available in 4,8 and 16 channel DVRs (models ending /P), a full complement of TVI PoC cameras are also available (models ending E) which together offer a cost-effective and time-saving solution to your TVI installations.
PLEASE NOTE: All PoC cameras can also work on non PoC recorders
1. All PoC capable TVI cameras can be powered locally via a separate power supply allowing them to be used on a none PoC TVI DVR
2. All none PoC TVI cameras can work on aPoC capable TVI DVR as the camera is powered via a separate power supply and PoC will only transmit when requested to by a compatible camera
3. PoC transmission must be used through RG59 coaxial or similar cable, it will not pass through CAT5/6 passive/active balun configurations
- 5MP high-performance CMOS
- Adopts HD-TVI technology
- 2.7 - 13.5mm motorized varifocal lens
- True day/night
- OSD menu
- Smart IR
- EXIR 2.0 technology
- Up to 40m IR distance
- IP67 weatherproof
- Up the Coax telemetry
- Digital wide dynamic range
- 12V DC
Hikvision Support UK
Affordable quality and competitively priced makes Hikvision IP the only choice for all new installs. Plug and play and is sold rebranded or rebadged versions such as HiKcom, Alien Mega Hero, DSD, Odyssey, LTS , KT&C to name a few. The systems are also available in TVI ( HD over coaxial or cat5e using video bulans) or as IP which is also HD over CAT5e with the added advantage of being able to carry power as well as data on one cable. Nearly all units sold by us have the power supply built into the recorder called PoE.
With just one CAT5e cable to run between NVR and cameras makes Hikvision IP systems fast and neat to install. No need for separate power supply or bulky coaxial cables.
For upgrades to High Definition ( HD), existing cables are likely to be coaxial cable ( like TV aerial cable ). In this situation where re-cabling to CAT5e would be costly, you can use a hybrid recorder. This will allow you to use HD TVI cameras on the coaxial cable and new ones can be wired in CAT5e.
The Hikvision IP cameras have an IP sniffer & configuration software called Hikvision SADP tools. This software is also needed to request password reset as well as the main tool for diagnosing problems. Make sure you install this on your laptop!
A familiar user interface to access the cameras GUI using Microsoft Internet Explorer if needed.