DS-3E0109P-E Hikvision 8 port PoE+ switch
Special Offer: A discount of 5% is available when you order £500.00 or more of any product.
DS-3E0109P-E Hikvision 8 port PoE+ switch 100Mbps.2 year guarantee.
DS-3E0109P-E is an 8 10/100Mbps ports unmanaged switch that requires no configuration and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as IP Cameras or IP Phones, etc.
- Up to 250m transmission achievable at reduced Mbps rate
- IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant
- 8 x 10/100Mbps Auto-MDIX PoE ports
- Provides up to 30 watts per PoE port
- PoE power budget 123W
- 4 kV surge protection for PoE ports
- IEEE 802.3x flow control support
- Plug-and-play installation
- 1.8 Gbps switching fabric
- 1.25 Mbits RAM Data Buffer
- 4K MAC address entries
- Sturdy metal enclosure
- Dimensions: 235 x 103 x 27mm
Hikvision Support UK
Affordable quality and competitively priced makes Hikvision IP the only choice for all new installs. Plug and play and is sold rebranded or rebadged versions such as HiKcom, Alien Mega Hero, DSD, Odyssey, LTS , KT&C to name a few. The systems are also available in TVI ( HD over coaxial or cat5e using video bulans) or as IP which is also HD over CAT5e with the added advantage of being able to carry power as well as data on one cable. Nearly all units sold by us have the power supply built into the recorder called PoE.
With just one CAT5e cable to run between NVR and cameras makes Hikvision IP systems fast and neat to install. No need for separate power supply or bulky coaxial cables.
For upgrades to High Definition ( HD), existing cables are likely to be coaxial cable ( like TV aerial cable ). In this situation where re-cabling to CAT5e would be costly, you can use a hybrid recorder. This will allow you to use HD TVI cameras on the coaxial cable and new ones can be wired in CAT5e.
The Hikvision IP cameras have an IP sniffer & configuration software called Hikvision SADP tools. This software is also needed to request password reset as well as the main tool for diagnosing problems. Make sure you install this on your laptop!
A familiar user interface to access the cameras GUI using Microsoft Internet Explorer if needed.