The Qtron QT-TU1OV428-WH IP network camera which Supports plug and play Hikvision, ONVIF & XM protocol.Compatible with Hikvision. Hikom /Alien (System Q) &XM NVR’s Hikvion & Qtron/Tvision hybrids. Some setups may be required manual IP address change using software provided or by using Hikvision SADP tools. Supports Line crossing/intrusion/ROI supported when used with Hikvision or Qtron NVRs.
Wide angle lens - allows a wider than a human eye view of the area a must for small rooms and were general observation is required such as school classrooms, small store rooms etc.
H265 encoding - also known as High-Efficiency Video encoding ( HEVC) is a method of compressing video for storage on to devices such as hard drive. Compared to the current encoding method which is H264, the video storage requirement is reduced by as much as 60%! Less storage space = cheaper hard drive or longer recording times.
Tripple stream encoding -allows the Qtron IP camera to display real-time video footage even if your NVR is set to record at a lower frame rate which is an issue with most NVRs
Audio input - for a microphone which allows sound to be recorded
Factory reset button - on cable in case you need to factory default the cameras, there's no need to wait or call anyone for a reset file.
- 4 Mega Pixel IP camera
- 2.8mm wide angle lens horizontal field of view: 81°
- SupportsHikvision,Qtron , AlienMegahero, DSD,LTS, KT&C , DSS NVRs
- wide dynamic range
- 4MP real-time video
- Audio input for a microphone
- Factory reset button on the cable
- 3D DNR & DWDR & BLC
- Night vision up to 30m
- PoE or 12V DC operation @120/560mA