Video balun 4 Channel with screw & RJ45
|Our Price: £7.92(£9.50 Inc. VAT)|
4 x BNC inputs or outputs to one RJ45 or 4 x terminal connections. Converts up to 4 video signals to be carried over CAT5. Easy to unplug each in/output which allows you to locate and earthing problems which are a nightmare for 3 phase work. Maximum range for colour signal is 300metres. No power required.
CCTV video baluns, also known as UTP baluns, allow traditional coax cable to be replaced by category 5 and other forms of twisted pair wire in CCTV video camera & surveillance installations. Video baluns allow installers to use more cost-effective structured cabling techniques to wire security cameras. By using video baluns, UTP wire such as cat-5 can be run over long distances easier than coax cable and for less money. Active balun transceivers enable UTP wires for cameras to be run distances up to 5,000 feet. If you are new to the idea of using baluns for video, check out our video balun installation videos.
This page contains baluns for analogue CCTV cameras and HD security cameras (AHD, HD-TVI, HD-CVI).
Please be aware while video signal can be carried over a longer distance, power is limited to 50 meters for cameras amperage up to 250mA and 30 meters at 600 mA.
Do not pair up the cable carrying the video signal but the other pairs will need to be paired for power.